User Manual Q&AAnswer
Jan 15, 2025 - 11:58 PM
To properly fit the Yeep H-10 Sport Safety Helmet, follow these steps:
1. Start by selecting the appropriate pad thickness to best conform to your head shape. Mix and match the pad thickness if needed.
2. Place the helmet firmly on your head and fasten the buckle. Make sure the helmet does not move back and forth or side to side while fastened.
3. Check which strap is loose. To tighten the chin strap, hold the buckle with one hand and pull the excess strap through. To tighten the rear strap, pull excess from the rear of strap 2. Hold the helmet with one hand and with the other hand, hold the straps where they pass under your chin. Then pull from side to side to balance the length of all four straps.
4. The helmet should sit firmly and level on your head. To lower the front of the helmet to cover your forehead, tighten the chin strap and loosen the rear strap. To raise the front, loosen the chin strap and tighten the rear strap.
5. To check for proper tension, put on the helmet and fasten the buckle. Open your mouth. You should feel the strap pulling against your chin.
6. The important thing to remember is that the helmet fits snugly. If you can tilt it forward or backward, you need to tighten the strap adjustment. The straps should not cover the ears, and the buckle should be away from the jaw when correctly fitted.
It is recommended to try different sizes and choose the size that feels secure and comfortable on your head. The helmet should be adjusted each time it is worn to ensure a snug fit and maximum protection.
For more information and illustrations, refer to the Yeep H-10 Sport Safety Helmet Owner's Manual.
Add New Comment