User Manual Q&AAnswer
Jan 15, 2025 - 11:50 PM
To install the FOCAL 1000 IWSUB Utopia On Wall Frame, please follow the installation instructions provided in the user manual. Here is a step-by-step guide:
1. Unbox the product and ensure that all the necessary components are included. The user manual should list the contents of the package.
2. Choose a suitable location on the wall where you want to install the frame. Make sure it is a sturdy and secure surface.
3. Use a stud finder to locate the wall studs. It is important to mount the frame securely to the studs for stability.
4. Mark the desired position on the wall for the frame. Double-check the measurements and alignment before proceeding.
5. Drill pilot holes into the wall at the marked positions. The size of the pilot holes should be appropriate for the mounting hardware provided with the frame.
6. Attach the mounting brackets or hardware to the back of the frame. Refer to the user manual for specific instructions on how to do this.
7. Carefully lift the frame and align it with the pilot holes on the wall. Make sure the frame is level and centered according to your preferences.
8. Insert screws or bolts through the mounting brackets/hardware and into the pilot holes on the wall. Tighten them securely, but be cautious not to overtighten and damage the frame or wall.
9. Once the frame is securely mounted, double-check its stability and adjust if necessary.
10. Connect the necessary audio cables or wires to the frame, following the instructions provided in the user manual.
11. Test the functionality of the FOCAL 1000 IWSUB Utopia On Wall Frame to ensure it is working properly.
If you encounter any difficulties during the installation process, it is recommended to consult the user manual for further guidance or contact Focal-JMlab customer support for assistance.
Add New Comment