User Manual Q&AAnswer
Jan 15, 2025 - 11:45 PM
To charge the LEDSAVERS 64258 Rechargeable Headlamp with Sensor, follow these steps:
1. Connect the included USB cable to the charging port located under the cover on the side of the lamp.
2. Connect the other end of the USB cable to a USB adapter or any USB power source.
3. The button on the headlamp will light up red, indicating that it is charging.
4. The charging process takes approximately 5 hours.
5. Once the battery is fully charged, the button will turn green.
It is important to note that the charging cable is included with the headlamp. Make sure to use the provided USB cable and a compatible USB adapter for safe and efficient charging.
For any further information or troubleshooting regarding the charging process, please refer to the LEDSAVERS 64258 Rechargeable Headlamp with Sensor User Manual.
Add New Comment