User Manual Q&AAnswer
Jan 15, 2025 - 10:20 PM
Ceiling Mount:
1. Ensure that the power supply is turned off before installation.
2. Determine the desired location for the panel frame on the ceiling.
3. Mark the positions for the mounting holes on the ceiling according to the dimensions of the panel frame.
4. Drill holes at the marked positions and insert appropriate anchors if necessary.
5. Align the panel frame with the mounting holes and secure it to the ceiling using screws or other suitable fasteners.
6. Connect the power supply to the panel frame according to the wiring instructions provided in the manual.
7. Once the installation is complete, turn on the power supply and test the panel frame to ensure it is functioning properly.
Wall Mount:
1. Make sure the power supply is switched off before starting the installation process.
2. Choose a suitable location on the wall for mounting the panel frame.
3. Mark the positions for the mounting holes on the wall based on the dimensions of the panel frame.
4. Drill holes at the marked positions and insert appropriate anchors if necessary.
5. Align the panel frame with the mounting holes and secure it to the wall using screws or other suitable fasteners.
6. Connect the power supply to the panel frame following the wiring instructions provided in the manual.
7. After completing the installation, turn on the power supply and test the panel frame to ensure it is working correctly.
Please note that these instructions are general guidelines. It is always recommended to refer to the specific instructions provided in the LED s light 600x600mm Panel Frame Instruction Manual for accurate installation steps and safety precautions.
Add New Comment