User Manual Q&AAnswer
Jan 15, 2025 - 10:10 PM
To connect the Carlsbro CLUB100 electronic drum set to your computer for recording, you can use the USB Audio feature. Here are the steps to follow:
1. Make sure your computer is turned on and the Carlsbro CLUB100 drum sound module is powered on.
2. Locate the USB Audio port on the drum sound module. It is usually labeled as "USB Audio" or "USB to Host."
3. Connect one end of a USB cable to the USB Audio port on the drum sound module.
4. Connect the other end of the USB cable to an available USB port on your computer.
5. Once the drum set is connected to your computer, you may need to select the Carlsbro CLUB100 as the audio input device in your recording software. Refer to your recording software's documentation for specific instructions on how to do this.
6. Set the desired recording settings in your recording software, such as sample rate, bit depth, and input levels.
7. Start your recording software and create a new audio track for recording.
8. Play the drums on the Carlsbro CLUB100, and the sound will be captured by your recording software.
9. After recording, you can edit, mix, and export your drum tracks as desired.
For more detailed instructions and troubleshooting tips, please refer to the Carlsbro CLUB100 Electronic Drum Set User Manual provided above.
Add New Comment