User Manual Q&AAnswer
Jan 15, 2025 - 10:03 PM
To adjust the volume of the drum kit and individual voices on the Carlsbro ROCK50 Electronic Drum Set, follow these steps:
1. Adjust the master volume: Strike the pads and adjust the volume xxxx on the module for a suitable master volume.
2. Adjust the volume of individual voices:
a. Press the SETUP/SAVE button to highlight the voice menu (the Voice LED will light up).
b. Press the [+/-] buttons to adjust the voice of the pad you are playing. This change will automatically save until the module is switched off.
3. Adjust the volume of the drum kit:
a. In voice mode, press the PAGE button to enter the voice volume adjustment (the screen will show [L - -l]).
b. Press the [+/-] buttons to adjust the voice volume of the pad you are playing (range 0-32). This change will automatically save until the module is switched off.
Note: If you want to permanently save your volume adjustments to a user drum kit, you can follow the steps in the "Saving adjustments" section of the manual on page 8.
Please refer to the Carlsbro ROCK50 Electronic Drum Set User Manual for more detailed instructions and illustrations.
Add New Comment