User Manual Q&AAnswer
Jan 15, 2025 - 10:01 PM
To set the time and date on the Lifemax 1614W Clear Time Day Date Wall Clock, please follow these steps:
1. LCD Display:
a. Remove the battery cover on the rear of the clock and insert 1 x AAA battery, ensuring the correct polarity.
b. Hold the SET button until the year starts to flash on the LCD display.
c. Use the UP key to change the year and confirm by pressing the SET button.
d. The display will move on to the month. Repeat the above process for the month and date, 12/24 hour mode, hour, and minute.
e. The LCD display will return to its default display after 20 seconds of inactivity.
2. Analogue Display:
a. Insert 1 x AA battery in the open slot, ensuring the correct polarity.
b. To set the analogue clock hands, rotate the xxxx on the reverse of the clock until the clock hands show the correct time.
Note: It is important to set both the date and time for the calendar to work properly. We recommend using the 24-hour mode to ensure the time is set correctly to AM or PM.
For further assistance or if you encounter any issues, please refer to the Lifemax customer support by calling 01635 874323.
Add New Comment