User Manual Q&AAnswer
Jan 15, 2025 - 09:49 PM
To connect your Moticam A5 digital camera to your microscope, follow these steps:
1. Remove the Dust Cap from the camera and attach the focusable lens.
2. Choose the right size eyepiece adapter and attach it to the focusable lens.
3. Attach this assembly to your microscope's eyepiece by tightening the centering screws on the eyepiece adapter.
4. Connect the USB power supply to the camera. When the light on the camera is on, it means the camera is working and transmitting images.
5. Connect to the Moticam X4 WiFi signal. Please refer to the instructions provided on page 11 of the user guide for detailed steps.
Note: If you are using a trinocular microscope, you will need to attach the microscope's C-Mount adapter to the camera. Please consult the relevant Motic Accessory list and choose an appropriate adapter for your Moticam. Depending on the type of adapter and microscope, the C-Ring may be necessary between the camera and the C-mount adapter.
For further assistance, please refer to the user guide or contact Motic's customer service.
Add New Comment