User Manual Q&AAnswer
Jan 15, 2025 - 09:38 PM
To install the Naeve 1355023 Luxor LED Ceiling Lights, please follow the steps below:
1. Before starting any work on the lamp, make sure to disconnect it from the mains power line by removing the fuse or unplugging the power plug. This is also necessary for cleaning and maintenance.
2. Prior to installation, de-energize the power line by removing the fuse and/or setting the switch to "OFF."
3. Ensure that the lamp is only for indoor use.
4. If your lamp has a transformer, it should only be operated with the original transformer.
5. It is important to note that electrical connections should only be carried out by expert staff.
6. During installation, pay attention to not damage the electric lines.
7. The Naeve 1355023 Luxor LED Ceiling Lights have a protective conductor (green-yellow wire) that must be connected to the protective earth-terminal. This is necessary as the luminaire is of protection class I.
8. Make sure plug and connection elements are free of strain and trick strengths.
Please refer to the user manual for any additional instructions or specific details related to the installation process.
Add New Comment