User Manual Q&AAnswer
Jan 15, 2025 - 09:17 PM
To install the GEBERIT 500605012 Slim Toilet Seat, please follow the steps outlined in the instruction manual provided with the product. Here is a step-by-step guide:
1. Start by removing the existing toilet seat. To do this, locate the two plastic bolts at the back of the seat and unscrew them using a screwdriver.
2. Once the old seat is removed, place the new GEBERIT 500605012 Slim Toilet Seat on the toilet bowl, aligning the holes in the seat with the holes in the bowl.
3. Take the two plastic bolts provided with the seat and insert them through the holes in the seat and bowl.
4. From underneath the toilet bowl, secure the bolts by tightening the nuts onto the bolts. Use a screwdriver or a wrench to tighten them securely, but be careful not to overtighten and damage the seat or bowl.
5. Once the seat is securely attached, check for any wobbling or instability. If needed, adjust the position of the seat and tighten the bolts further.
6. Finally, ensure that the seat is aligned properly and sits evenly on the toilet bowl. Close the seat and check if it opens and closes smoothly.
Please note that these instructions are a general guideline. For specific details and illustrations, refer to the GEBERIT 500605012 Slim Toilet Seat Instruction Manual provided with the product.
Add New Comment