User Manual Q&AAnswer
Jan 15, 2025 - 09:07 PM
To install the SUPERATV WM-P-RAN570-XX Winch Mount, please follow these steps:
1. Ensure that you do not discard the packaging until the product has been successfully installed.
2. Note that the winch is not included and is shown for illustration purposes only.
3. If the fairlead is smaller than the opening in the bumper, additional hardware is required for installation (not included).
4. It is important to be aware that SuperATV's products are designed to fit your ATV/UTV under stock conditions. Adding, modifying, or fabricating any factory or aftermarket parts will void any warranty provided by SuperATV and is not recommended.
5. If you have aftermarket products on your machine, it is recommended to contact SuperATV to verify compatibility with the winch mount.
6. Installing lift kits, long travel or suspension kits, tires, etc. may change the ride of your machine and may increase maintenance and part wear.
7. Operating any off-road machine while, or after, consuming alcohol and/or drugs increases the risk of bodily harm or death. SuperATV urges operators and occupants to wear a helmet and appropriate riding gear at all times.
8. By purchasing and installing SuperATV products, you agree that SuperATV will not be held responsible for any damages, loss of time, use, labor fees, replacement parts, or freight charges.
9. SuperATV and any third party will not be held responsible for any direct, indirect, incidental, special, or consequential damages that result from any product purchased from SuperATV.
10. The warranty provided by SuperATV only covers parts provided by SuperATV. Damage or problems with OEM housings, bearings, seals, or other manufacturers' products will not be covered.
11. Ensure that the winch is properly installed on the mount using the hardware included with the winch.
12. Tighten all hardware securely.
Please refer to the SUPERATV WM-P-RAN570-XX Winch Mount Instruction Manual for more detailed instructions and safety precautions.
Add New Comment