Answer
Jan 15, 2025 - 08:58 PM
The pressure and detergent dosing display/indicator on the KARCHER G 180 Full Control Plus Power Gun only works when used with a K 5 - / K 7 Full Control Plus high-pressure cleaner and the original Full Control spray lance included. Alternatively, you can use the replacement spray lances listed in the device operating instructions.
To use the pressure and detergent dosing display/indicator, follow these steps:
1. Connect the KARCHER G 180 Full Control Plus Power Gun to a compatible K 5 - / K 7 Full Control Plus high-pressure cleaner.
2. Ensure that the high-pressure cleaner is turned on and the water supply is connected.
3. Attach the Full Control spray lance or one of the compatible replacement spray lances to the power gun.
4. Adjust the pressure level using the pressure control buttons on the power gun. The pressure level will be displayed on the pressure indicator on the power gun.
5. To adjust the detergent dosing level, rotate the detergent dosing control xxxx on the power gun. The detergent dosing level will be displayed on the detergent dosing indicator on the power gun.
6. Start cleaning by pulling the trigger on the power gun. The high-pressure cleaner will deliver the selected pressure and detergent dosing level.
Please note that not all pressure levels can be reached with special accessories, so refer to the operating instructions for the Full Control Plus high-pressure cleaner for more information on compatible accessories and their pressure limitations.
Add New Comment