How do I assemble and use the PHILCO PHHB 6620 Stick Blender? (PHILCO PHHB 6620 Stick Blender User Manual)

Answer

manuals.plus

Jan 15, 2025 - 08:22 PM

To assemble and use the PHILCO PHHB 6620 Stick Blender, follow these steps:

1. Blender:
- Fill the blending jar with 2 parts of fruit and 3 parts of water, making sure not to exceed the max level mark.
- Attach the blender shaft to the motor base.
- Operate the blender at the highest speed for a maximum of 1 minute.

2. Egg beater:
- Place 4 eggs in the bowl.
- Attach the egg beater gear box to the motor base.
- Operate the egg beater at the highest speed for a maximum of 2 minutes.

3. Mini chopper:
- Put 200g of meat into the mini chopper bowl, ensuring the meat is cut into pieces not exceeding 20 x 20 x 40 mm.
- Attach the chopper gear box to the motor base.
- Operate the mini chopper at the highest speed for a maximum of 30 seconds.
- For blending purposes, put 150g of maltodextrin and 50g of blended egg into the mini chopper bowl.
- Operate the mini chopper at the highest speed for a maximum of 15 seconds.

Cleaning & maintenance:
- Before cleaning the product, make sure to switch it off and disconnect it from the power supply.
- Be cautious when cleaning the sharp blades.
- The blending jar can be cleaned using water, but avoid using chemical agents or other liquids.
- Clean the motor base using a dry cloth only. Do not use a wet cloth or immerse the motor base in water.
- If the product operates with abnormal noise or shakes excessively, stop using it and send it to a service agent for inspection. Do not attempt to repair it yourself.

Please refer to the "Cleaning & maintenance" section of the user manual for more detailed instructions on cleaning and maintenance.

Note: The information provided is based on the user manual of the PHILCO PHHB 6620 Stick Blender. Always refer to the manual for complete and accurate instructions.