User Manual Q&AAnswer
Jan 15, 2025 - 08:09 PM
To program the quantity of espresso and milk for each function on the Fricoffee CJ-265C Espresso Machine, follow these steps:
1. Fill the device with water and milk as needed.
2. Insert the desired filter into the portafilter.
3. Fill the filter with coffee powder.
4. Insert the portafilter into the device.
5. Fold out the milk nozzle if necessary.
6. Press the power button to switch on the device and preheat the water.
7. Place a cup under the coffee outlet or milk nozzle.
8. Once the device has heated up, the control panel will stop flashing.
9. Press and hold the button for the function you want to reprogram (espresso, double espresso, milk froth, cappuccino, or latte macchiato).
10. Release the button once the desired quantity of espresso or milk has passed through. You will hear three beeps, indicating that the quantity is saved.
11. Repeat the process for each function, adjusting the quantities as desired.
12. The programmed quantities will be saved until you set new quantities.
By following these steps, you can customize the amount of espresso and milk for each specialty coffee according to your taste preferences.
Add New Comment