Answer
Jan 15, 2025 - 09:09 AM
To connect the Volca Beats to your computer or DAW, you will need a MIDI interface or a USB MIDI interface. Here's how to set it up:
1. Connect the MIDI out port of the Volca Beats to the MIDI in port of your MIDI interface using a MIDI cable.
2. Connect the MIDI in port of the Volca Beats to the MIDI out port of your MIDI interface using another MIDI cable.
3. If you are using a USB MIDI interface, connect the USB cable from the interface to your computer.
4. Open your DAW software and configure it to recognize the MIDI interface as a MIDI input device.
5. Set the MIDI channel on the Volca Beats to match the MIDI channel configured in your DAW.
6. Now you can send MIDI data from your DAW to the Volca Beats for playback and record the Volca Beats' MIDI output in your DAW for further editing and mixing.
For more detailed instructions and troubleshooting tips, refer to the "Connectivity" section of the Korg Volca Beats Owner's Manual.
Add New Comment