User Manual Q&AAnswer
Jan 15, 2025 - 08:55 AM
To import your own audio samples into the KORG electribe2, you can follow these steps:
1. Connect a USB cable from your computer to the USB port on the electribe2.
2. Turn on the electribe2 and set it to USB mode by pressing the GLOBAL button, then selecting "MIDI" and setting the USB mode to "MIDI."
3. On your computer, open a file browser and locate the audio samples you want to import.
4. Drag and drop the audio samples into the "SAMPLE" folder on the electribe2's USB drive.
5. Once the samples are copied, disconnect the USB cable from the electribe2 and your computer.
6. On the electribe2, press the SAMPLE button to access the sample mode.
7. Use the VALUE dial to select an empty sample slot where you want to import the sample.
8. Press the LOAD button, then use the VALUE dial to select the sample you want to import.
9. Press the LOAD button again to confirm the import.
For more detailed instructions and information on sample editing and manipulation, please refer to the "Sampling" section of the KORG electribe2 Owner's Manual, which can be found in the provided link.
Add New Comment