User Manual Q&AAnswer
Jan 15, 2025 - 08:26 AM
To connect the XFADR Uongfi Hand-Rolled Electronic Drum to your computer for recording, follow these steps:
1. Ensure that your computer has a MIDI/USB port or adapter. If not, you may need to purchase a MIDI-to-USB adapter separately.
2. Connect one end of the USB cable (included in the package) to the MIDI/USB port on the drum pad.
3. Connect the other end of the USB cable to the MIDI/USB port on your computer.
4. Once connected, your computer should recognize the electronic drum as a MIDI device.
5. Open your preferred recording software on your computer. This can be a digital audio workstation (DAW) or any software that supports MIDI input.
6. In the recording software, select the XFADR Uongfi Hand-Rolled Electronic Drum as the MIDI input device.
7. Configure the MIDI settings in the recording software to ensure proper communication between the drum pad and your computer.
8. You can now start recording your drumming performances by pressing the record button in the recording software.
Note: The specific steps may vary depending on the recording software you are using. Refer to the software's user manual or online resources for more detailed instructions on MIDI setup and recording.
Please consult the XFADR Uongfi Hand-Rolled Electronic Drum user manual for any additional information or troubleshooting tips related to connecting the drum pad to your computer for recording.
Add New Comment