User Manual Q&AAnswer
Jan 15, 2025 - 05:21 AM
To assemble and install the BRAYER BR4881 Convector Heater, follow these steps:
1. Stand mode:
a. Turn over the unit body and match the openings on the feet with the corresponding openings in the bottom part of the unit body.
b. Fix the feet with the screws supplied with the unit.
c. Alternatively, you can insert the wheels into the feet.
d. Turn over the unit and place it on an even steady surface.
e. Fix the carrying handle with the provided screws.
2. Using the Convection Fan Heater:
a. Place the convection fan heater vertically on an even, dry, moisture- and thermal-resistant surface. Do not place it horizontally or turn it over.
b. Do not place the convection fan heater on soft surfaces such as carpets with high pile, sofas, or beds.
c. Maintain a distance of at least 1 meter between the convection fan heater and furniture.
d. To avoid mains overloading, do not switch on several electrical appliances with high power consumption at the same time.
e. Insert the power plug into the main socket.
f. Set the operation mode switch to the desired position: off, low power (1000 W), or maximal power (2000 W).
g. Turn the thermostat control xxxx clockwise to the maximum position ("MAX"). The light indicator will light up.
h. When the desired air temperature in the room is reached, turn the thermostat control xxxx counterclockwise until a distinctive click. The light indicator will go out, and the set air temperature will be maintained.
i. To increase the air temperature, turn the thermostat xxxx clockwise, and counterclockwise to decrease it.
j. After usage, turn the thermostat control xxxx counterclockwise as far as it will go, set the operation mode switch to "0", and unplug the unit.
Please refer to the instruction manual for additional safety measures, cleaning instructions, and technical specifications.
Add New Comment