How do I install and set up the SHARP Unified Control and Asset Management Software? (Sharp Unified Control Management Software User Guide)

Answer

manuals.plus

Jan 15, 2025 - 05:13 AM

To install and set up the SHARP Unified Control and Asset Management Software (NaViSet Administrator 2), please follow the steps below:

1. Download the software from the appropriate website based on your region (Americas or Europe, Middle East, and Africa).

2. Once the download is complete, locate the downloaded file and double-click on it to start the installation process.

3. Follow the on-screen instructions to complete the installation. Make sure to review and accept the software license agreement.

4. After the installation is finished, launch the NaViSet Administrator 2 software.

5. In the software, click on the "Add Device" button to add the display devices you want to manage. You can add NEC desktop displays, NEC large-screen displays with LAN or RS232 connection, NEC projectors with LAN or RS232 connection, and PJLink-compatible devices with a LAN connection.

6. Enter the necessary information for each device, such as IP address or serial port settings, depending on the type of connection.

7. Once the devices are added, you can start managing them from the software's graphical user interface. You can monitor the status of the devices, control settings like brightness and video input, and perform tasks like power on/off.

8. The software also allows you to export device information to Excel or text files, schedule tasks, and generate reports based on the compiled data.

For more detailed instructions and information on using the software, refer to the SHARP Unified Control and Asset Management Software User Guide provided with the software or available on the SHARP website.

Note: It is recommended to consult the user guide for any specific troubleshooting or advanced configuration requirements.