How do I apply the OSCULATI 65.950.00 GRIP-PRO Water-Based Anti-Slip Coating Kit? (OSCULATI 65.950.00 GRIP-PRO Coating Kit Instruction Guide)

Answer

manuals.plus

Jan 15, 2025 - 04:59 AM


To apply the OSCULATI 65.950.00 GRIP-PRO Water-Based Anti-Slip Coating Kit, please follow these steps:

1. Surface Preparation: Clean the surface thoroughly to remove any dust, crumbly parts, and foreign or bonding-proof matters.

2. Application: The product is ready to use and can be applied using a short-bristle roller or brush. Ensure that the temperature is between +5°C and +35°C during application.

3. Coating: Apply the product in at least 2 coats, with a waiting time of 24 hours between each coat. This will ensure an even thickness and ideal waterproofing.

4. Useful Advice: Do not add any additives, water, or solvents to the product. Avoid applying the coating if rain is imminent. Protect the coated surface from water, rain, and snow during the first 24 hours after application.

Please note that the OSCULATI 65.950.00 GRIP-PRO Water-Based Anti-Slip Coating Kit should not be used if the container is damaged. Additionally, it is important to store the product in its undamaged packaging at temperatures between +5°C and +35°C. The product has a shelf life of 18 months and is not frost-proof.

For any further inquiries or specific concerns, it is recommended to contact Osculati S.r.l. directly through their provided contact information: Osculati S.r.l. via Pacinotti, 12 20054 Segrate Ml, tel 02 2699 111, fax 02 2699 1120, www.osculati.com, info@osculati.it.