User Manual Q&AAnswer
Jan 15, 2025 - 04:48 AM
To connect the to your TV, please follow these steps:
1. Locate the "Ant In" port on your TV or digital converter box. This port is usually labeled and can be found on the back or side of the device.
2. Take the cable that comes with the Gitre HD Digital TV Antenna and connect one end to the "Ant In" port on your TV or digital converter box.
3. Find a suitable location for the antenna. It is recommended to place the antenna in a location with a clear line of sight to the sky, preferably near a window. This will help optimize reception.
4. (Optional) If you have the amplifier signal booster that came with the antenna, you can connect it to the antenna for enhanced reception. Simply connect the amplifier signal booster to the antenna's cable, and then connect the other end of the amplifier signal booster to a USB power source using the provided USB power cable.
5. Once everything is connected, turn on your TV or digital converter box.
6. Use your TV's remote control to access the menu or settings.
7. Look for the option to scan for channels. This option may be called "Channel Scan," "Auto Program," or something similar. Refer to your TV's user manual for specific instructions on how to perform a channel scan.
8. Start the channel scan and wait for it to complete. This process may take a few minutes as the TV or digital converter box searches for available channels.
9. After the channel scan is complete, your TV or digital converter box should display a list of available channels. You can now enjoy watching these channels using the Gitre HD Digital TV Antenna.
Note: It is recommended to rescan for channels whenever you move the antenna or make any changes to its position or range settings. This will ensure that you receive the best possible reception.
Add New Comment