User Manual Q&AAnswer
Jan 15, 2025 - 04:45 AM
To set up a new user profile on the Escali USHM180G Body Composition Scale, please follow these steps:
1. Remove the insulating plastic strip from the battery compartment and ensure the batteries are properly seated within the +/- terminals.
2. Press the UNIT button on the base of the scale to select your desired unit of measure: pounds (lb), kilograms (kg), or stones (st).
3. Press the ENTER button and use the LEFT or RIGHT arrow buttons located on the side of the scale to select a profile number. Press ENTER to confirm.
4. The display will show "CLrN". Using the arrow buttons on the side, select "N" to continue or "Y" to reset your profile. Press ENTER to confirm.
5. Select your gender using the LEFT or RIGHT arrow buttons. You can activate Athlete Mode by selecting your gender with the accompanied running figure. Press ENTER to confirm.
6. Select your height using the LEFT or RIGHT arrow buttons and press ENTER to confirm.
7. Select your age using the LEFT or RIGHT arrow buttons and press ENTER to confirm.
8. When the display shows zero weight, step on the scale with clean and dry bare feet. The scale will measure your weight and then calculate your body composition.
Note: This body scale can save up to 8 unique user profiles. To program additional profiles, repeat steps 3 to 8.
For more detailed instructions and information, please refer to the Escali USHM180G Body Composition Scale User Manual.
Add New Comment