User Manual Q&AAnswer
Jan 15, 2025 - 04:34 AM
To connect the DANLEY PG96 Sound System to an amplifier, you will need to follow these steps:
1. Locate the two NL4 ("speak-on") connectors on the rear panel of the sound system.
2. The PG96 is wired in a bi-amp configuration, so you will need to use a bi-amp cable or two separate cables for the low-frequency (LF) and mid/high-frequency (Mid/High) signals.
3. Connect the positive (+) terminal of the LF channel on your amplifier to the 1+ terminal on the NL4 connector of the sound system.
4. Connect the negative (-) terminal of the LF channel on your amplifier to the 1- terminal on the NL4 connector of the sound system.
5. Connect the positive (+) terminal of the Mid/High channel on your amplifier to the 2+ terminal on the NL4 connector of the sound system.
6. Connect the negative (-) terminal of the Mid/High channel on your amplifier to the 2- terminal on the NL4 connector of the sound system.
Please note that it is important to use the correct polarity when connecting the amplifier to the sound system. The positive and negative terminals should match accordingly.
For further information and visual reference, you can refer to the "Pinout: Bi-amp Wiring View of an NL4 Connector" section in the DANLEY PG96 Sound System Owner's Manual.
If you have any additional questions or need further assistance, it is recommended to contact Danley Sound Labs directly at info@danleysoundlabs.com or visit their website at www.danleysoundlabs.com for more information.
Add New Comment