User Manual Q&AAnswer
Jan 15, 2025 - 04:16 AM
To connect the Danley Outdoor Series Loudspeakers to an amplifier, follow these steps:
1. Locate the two NL4 ("speak-on") connectors on the rear panel of the loudspeaker.
2. The Outdoor Series loudspeakers are wired as passive, meaning they require an external amplifier to power them.
3. The two NL4 connectors are wired in parallel, so you can use either connector to connect your amplifier.
4. The pinout for the NL4 connectors is as follows:
- Pin 1+: Positive Full Range
- Pin 1-: Negative Full Range
- Pin 2+: Pass Through
- Pin 2-: Pass Through
5. Use a compatible NL4 cable to connect the appropriate output channels of your amplifier to the NL4 connector on the loudspeaker.
6. Ensure that the connections are secure and properly tightened.
7. Repeat the process for each loudspeaker in your setup, if applicable.
8. Once the connections are made, you can power on your amplifier and adjust the volume levels accordingly.
Please note that it is important to select the right amplifier for your loudspeakers based on the specifications and requirements provided in the owner's manual. It is also recommended to consult with a professional or qualified service personnel if you have any doubts or concerns about the setup process.
Add New Comment