Answer

Jan 15, 2025 - 04:13 AM
To install the modular square Bell Modal Synthesis module, you will need to locate 2HP of space in your Eurorack case. Confirm the positive 12 volts and negative 12 volts sides of the power distribution lines. Plug the connector into the power distribution board of your case, making sure that the red band corresponds to the negative 12 volts. In most systems, the negative 12 volt supply line is at the bottom. The power cable should be connected to the module with the red band facing the front of the module.
For more detailed instructions and illustrations, please refer to the installation section in the user manual.
Note: The information provided here is a summary of the installation process. For complete and accurate instructions, please consult the user manual that came with your modular square Bell Modal Synthesis module.
Add New Comment