User Manual Q&AAnswer
Jan 15, 2025 - 04:06 AM
To assemble and install the RL R624731xx Route Sufitowa Lamp, please follow the steps below:
1. Safety Precautions:
- Before starting the assembly, make sure to read and understand all the safety instructions provided in the user guide.
- Ensure that the power supply is switched off before handling the lamp.
2. Unpacking:
- Carefully remove all the components from the packaging and check if everything is included as per the specification mentioned in the user guide.
3. Mounting the Lamp:
- Choose a suitable location on the ceiling to mount the lamp.
- Ensure that the mounting surface is sturdy and capable of supporting the weight of the lamp.
- Use appropriate screws and wall plugs (not included) to securely attach the mounting bracket to the ceiling.
4. Electrical Connection:
- Connect the lamp to a 230V~50Hz power supply.
- Make sure the power supply is switched off before making any electrical connections.
- Follow the wiring diagram provided in the user guide to connect the lamp to the power supply.
- If you are unsure about electrical connections, it is recommended to consult a qualified electrician.
5. Installing the Light Source:
- The RL R624731xx Route Sufitowa Lamp uses 3 x LED 5W light sources.
- Insert the LED light bulbs into the lamp sockets provided.
- Ensure that the light bulbs are securely fitted and properly aligned.
6. Final Steps:
- Double-check all the connections and ensure that they are properly secured.
- Switch on the power supply and test the lamp to ensure it is functioning correctly.
- Adjust the direction of the light as desired.
For any further assistance or troubleshooting, please refer to the user guide provided with the RL R624731xx Route Sufitowa Lamp.
Add New Comment