User Manual Q&AAnswer
Jan 15, 2025 - 04:05 AM
To connect the e-Loop to the wireless vehicle detection device, follow these steps:
1. Hold the remote close to the e-Loop and press the CONNECT button.
2. If the pairing is successful, "Pair Success" will be displayed on the screen, and the red LED on the e-Loop will illuminate. If not successful, the screen will display "Timeout".
3. Press the MENU button. The Diagnostics option will be highlighted, press the SET button to select.
4. The screen will display the magnetic field reading, trip value, and temperature.
5. You can test the e-Loop on the bench by moving a magnetic screwdriver close to the e-Loop. The reading value will increase until it trips and sends an open command.
6. To disconnect the e-Loop, press the CONNECT button.
Please refer to the user guide for more detailed instructions and illustrations.
Add New Comment