User Manual Q&AAnswer
Jan 15, 2025 - 03:54 AM
To charge the battery of the Bushnell 362110 GPS Rangefinder, you will need to follow these steps:
1. Make sure the unit is turned off.
2. Connect the smaller plug on the included USB-C cable to the port at the bottom side of the unit.
3. Connect the large (standard) USB plug (not included) to your computer or a USB charger.
4. Once connected, press the POWER button on the unit. The display will show the battery icon charging.
5. The battery will take approximately 3.5 hours to fully charge from a totally discharged state. If there is a partial charge remaining, it will take less time.
6. When the battery is fully charged, a full circle will be displayed around the battery icon on the unit's screen.
Note: The Phantom 2 and USB-C cable are compatible with all USB ports, including iPhone/other smartphone USB chargers.
It is important to avoid charging the battery when the temperature is over 113°F (45°C) and to store the unit in temperatures between 32°F (0°C) and 113°F (45°C). Additionally, do not attempt to open, disassemble, or service the internal battery, as it is not replaceable.
Add New Comment