User Manual Q&AAnswer
Jan 15, 2025 - 03:38 AM
To set up the Aqara MCCGQ11LM Door and Window Sensor, follow these steps:
1. Download the Aqara Home app from your app store and install the Aqara hub.
2. Open the Aqara Home app and tap on "Home" and then tap on the "+" icon in the top right corner to enter the "Add Device (Accessory)" page.
3. Select "Door and Window Sensor" from the list of accessories.
4. Follow the on-screen instructions to add the sensor to your Aqara system.
5. If the connection fails, move the sensor closer to the Aqara hub and try again.
Note: The Aqara hub is required for the Aqara MCCGQ11LM Door and Window Sensor to work with HomeKit technology. Make sure you have the hub installed before setting up the sensor.
For more detailed instructions, refer to the Aqara MCCGQ11LM Door and Window Sensor User Guide provided above.
Add New Comment