User Manual Q&AAnswer
Jan 15, 2025 - 03:35 AM
To assemble the Toyz Fiesta ride-on car, please follow these steps:
1. Place the steering column in the steering unit and tighten it with the provided xxxx .
2. Pass the steering column through the hole in the bodywork and through the other hole in the upper body.
3. Insert the steering wheel into the hole in the body and align it with the small front wheel. The smaller front wheels should be in front.
4. Fasten the steering wheel with the provided xxxx .
5. Align the rear wheel module with the hole in the body of the ride-on car. When properly installed, the rear wheels will be locked and will not fall out of the body by themselves. Secure the wheels with the provided screws.
6. The ride-on car has built-in melodies and a light module. To activate them, insert 3 AA 1.5V batteries from the bottom of the rider's body and insert 2 AAA 1.5V batteries from the bottom of the steering wheel.
7. To start the sound signals and lights, press the button on the front of the rider.
Please refer to the manual for visual illustrations and additional information on the assembly process.
Add New Comment