User Manual Q&AAnswer
Jan 15, 2025 - 03:30 AM
To adjust the heat settings on the AEscod NFJ-9 electric heater, follow these steps:
1. Locate the switch on the heater that controls the heat settings. It should be labeled with "High Heat," "Low Heat," and "Natural Wind."
2. To select the High Heat setting (1500W), move the switch to the position labeled "High Heat." This setting provides the highest level of heat output.
3. To select the Low Heat setting (750W), move the switch to the position labeled "Low Heat." This setting provides a lower level of heat output.
4. If you prefer to use the heater without heat, you can select the Natural Wind mode. Move the switch to the position labeled "Natural Wind." In this mode, the heater will not produce heat but will still provide a gentle breeze.
5. Make sure to choose the appropriate heat setting based on your comfort and heating needs.
Note: Always ensure the base of the heater is assembled for stability before operating and adjust the 90° adjustable angle to direct the heat where needed.
Add New Comment