User Manual Q&AAnswer
Jan 15, 2025 - 03:29 AM
To mount the SEALEY GV180WM Garage Vacuum onto the wall, follow these steps:
1. Choose a wall that is not more than 5.5mtr away from an electrical outlet.
2. Use the Mounting Rack Hole Template provided in section 9 of the user manual to align the three xxxx holes into a sound wall.
3. Make sure the mounting rack is level, then drill 3mm pilot holes and secure the rack onto the wall using the three screws provided.
4. Insert the steel rod of the hose holding rack into the two holes located on the top of the mounting rack.
5. Insert the steel rod into the hose holding rack and snap it into place. Make sure the buttons on the rod are facing towards you.
6. Locate the two openings on the bottom of the mounting rack and insert the wire accessory storage into the mounting rack until they lock into place. Make sure the wire accessory storage is directed towards the front of the mounting rack.
Please refer to section 5.1 of the user manual for detailed instructions and illustrations on mounting the vacuum onto the wall.
Add New Comment