User Manual Q&AAnswer
Jan 15, 2025 - 03:27 AM
To switch between PCs using the INOGENI B09JPDQ9SB Toggle USB 3.0 Switcher, you can follow these steps:
1. Automatic Mode: By default, the switcher is set to automatic mode. In this mode, the switcher will automatically switch to the last PC that was connected. If the current PC is disconnected, the switcher will switch back to the other PC if it is detected. You can also use the push-button or remote control to switch between PCs.
2. Manual Mode: If you want to manually select a specific PC, you can switch to manual mode. In this mode, you can use the push-button or remote control to force a specific PC selection. To switch to manual mode, you can use the INOGENI Control App or the RS232 interface. The selected mode will be saved onboard the device.
Please refer to the user guide for more detailed instructions on how to switch between PCs and configure the switcher according to your specific needs.
Add New Comment