User Manual Q&AAnswer
Jan 15, 2025 - 03:25 AM
To prepare the valve and measure with the Danfoss PFM100 Measuring Instrument, please follow these steps:
1. Ensure that the pump is set in constant pressure mode. This is important for accurate measurements.
2. Make sure that all the valves in the system are fully open. This allows for proper flow and accurate readings.
3. Once the valve and system are prepared, you can begin measuring with the PFM100 Measuring Instrument. The instrument is designed to measure flow, pressure, and temperature in heating and cooling systems.
4. Refer to the user guide provided by Danfoss for detailed instructions on how to operate the PFM100 Measuring Instrument. The user guide will provide step-by-step instructions on how to connect the instrument, select the desired measurement parameters, and interpret the readings.
5. It is recommended to consult the Danfoss Δp Tool for Dynamic Valve™ (example) for pump optimization. This tool can help optimize the performance of the valve and ensure efficient operation of the system.
If you require further assistance or have specific questions about the Danfoss PFM100 Measuring Instrument, you can contact Danfoss directly through their website heating.danfoss.com or by calling +45 7488 2222. You can also reach them via email at heating@danfoss.com.
Add New Comment