User Manual Q&AAnswer
Jan 15, 2025 - 03:25 AM
To connect the PETEME PA19W Smart LED Bulb to your Wi-Fi network, you can follow the EZ Mode or AP Mode configuration methods provided in the user manual.
1. EZ Mode (quick flash):
- Make sure the device is powered off for more than 10 seconds, then power it on.
- Switch the power of the device three times (on-off-on-off-on), with an interval of 2 to 4 seconds between each on and off.
- Wait for the lighting device to start flashing quickly, indicating it has entered EZ Mode. You can now add the device.
2. AP Mode (slow flash):
- There is no need to power off the device.
- Turn on and off the power of the device three times (on-off-on-off-on) while the lighting device is flashing fast, with an interval of 2 to 4 seconds between each on and off.
- Wait for the lighting device to start flashing slowly, indicating it has entered AP Mode. You can now add the device.
Note: Before configuring the smart bulb, make sure it is powered off for more than 10 seconds. Additionally, ensure that your Wi-Fi router is a 2.4G network (not compatible with 5.0GHz), your phone is connected to the Wi-Fi router, and the smart bulb is not installed too far away from the Wi-Fi router.
For further assistance or if you have any other questions, you can contact PETEME's service email at service@kxg.com.
Add New Comment