User Manual Q&AAnswer
Jan 15, 2025 - 03:21 AM
To charge the REXTON Bi-Core C R-Li Durable and Rechargeable Hearing Aids, please follow these steps:
1. Ensure that the hearing aids are charged approximately 30% before programming.
2. Connect the charger to a power source using the provided charging cable.
3. Place the hearing aids in the charger. Make sure they are properly aligned with the charging contacts.
4. Allow the hearing aids to charge for a minimum of 15 minutes before programming.
5. After the initial charging period, remove the hearing aids from the charger to activate and program them.
6. The hearing aids will turn on automatically once removed from the charger.
7. They will be in pairing mode for 3 minutes, allowing you to connect them to compatible devices.
8. To program the hearing aids, you will need to use Noahlink Wireless, which is a programming device compatible with REXTON hearing aids.
9. Follow the programming instructions provided with Noahlink Wireless to adjust the settings and personalize the hearing aids according to your needs.
Please note that the information provided here is a general guide. For more specific instructions and troubleshooting, it is recommended to refer to the REXTON Bi-Core C R-Li Durable and Rechargeable Hearing Aids User Guide or contact the manufacturer's customer support for assistance.
Add New Comment