How do I install the KUZCO WS90717 LED Wall Sconce? (KUZCO WS90717 LED Wall Sconce User Guide)

Answer

manuals.plus

Jan 15, 2025 - 03:02 AM


To install the KUZCO WS90717 LED Wall Sconce, please follow the steps below:

1. Ensure that the power is completely off at the fuse box before starting the installation.
2. It is recommended to have the fixture installed by a qualified licensed electrician.
3. Prepare the installation area by clearing it of any obstructions.
4. Wear gloves at all times during the installation process.
5. Read the instructions carefully before beginning the assembly.
6. Keep the installation sheet for future reference.
7. If you require technical support, you can contact KUZCO at 1-855-855-8926.

Please note the following important points:
- The KUZCO LED fixture comes with pre-wired LED module(s). Avoid touching any part of the LED module(s) unless instructed, as unnecessary contact may cause permanent damage.
- For dimming functionality, an ELV (Electronic Low Voltage) type of dimmer is required.
- The fixture operates on 120V input.

Now, let's proceed with the installation steps:

1. Remove the fixture from its original package.
2. Separate the mounting plate (1c) from the canopy (2a) and fixture backplate (3a) by removing the backplate screws (3b).
3. Attach the mounting plate (1c) to the electrical junction box (1a) using the junction box screws (1e) provided in the hardware package.
4. Make proper electrical connections by connecting the black wire to the hot "L" terminal, the white wire to the neutral "N" terminal, and the ground wire to the "GND" terminal. Use the wire nuts (1b) provided in the hardware package.
5. Attach the fixture backplate (3a) to the canopy (2a) and mounting plate (1c) using the backplate screws (3b). Optionally, you can adjust the orientation of the fixture backplate to align it with the canopy.
6. Attach the fixture (3c) to the fixture backplate (3a) using the fixture screws (2b).

For any further assistance or clarification, please refer to the KUZCO WS90717 LED Wall Sconce User Guide or contact KUZCO's technical support at the provided phone number.