User Manual Q&AAnswer
Jan 15, 2025 - 03:01 AM
To install the DAYTON AUDIO SB-WM Wall Mount Speaker Bracket, please follow the steps below:
1. Ensure you have all the necessary tools required for installation, including a drill, screwdriver, level, and measuring tape.
2. Determine the desired location for mounting the bracket. Ensure it is a sturdy wall surface capable of supporting the weight of the speaker.
3. Use the included template to mark the drilling holes on the wall. Ensure the template is level and aligned properly.
4. Drill pilot holes at the marked locations using an appropriate drill bit size for the wall material.
5. Attach the bracket to the wall using the provided screws and wall anchors. Make sure the bracket is securely fastened to the wall.
6. Adjust the angle of the bracket to the desired position for optimal speaker placement. Tighten the adjustment screws to secure the angle.
7. Attach the speaker to the bracket using the included speaker mounting hardware. Ensure the speaker is securely attached and properly aligned.
8. Double-check the stability of the bracket and speaker assembly before releasing it. Ensure it can support the weight of the speaker without any wobbling or instability.
Please refer to the DAYTON AUDIO SB-WM Wall Mount Speaker Bracket Instruction Manual for more detailed installation instructions and safety precautions.
Add New Comment