How do I set up the ihartan OEM-iHar-01 WiFi Extender using the Web UI method? (ihartan OEM-iHar-01 WiFi Extender User Guide)

Answer

manuals.plus

Jan 15, 2025 - 02:56 AM


To set up the ihartan OEM-iHar-01 WiFi Extender using the Web UI method, follow these steps:

1. Power On: Plug the extender into an outlet near your router.
2. Connect to iHAR-2G/5G: Go to your phone/PC WiFi settings page and wait for your device to search for networks. Connect to the extender's network named "iHAR-2G" or "iHAR-5G". Make sure to disable mobile data.
3. Enter the Login Page: After connecting to the extender's network, the login page should pop up automatically. If it doesn't, launch a web browser and enter "192.168.10.1" in the address bar.
4. Login: Create your own login password to log in or skip this part.
5. Extend Your WiFi Signal: Select the WiFi network you want to extend, enter its password, and click "Save Setting". Ensure the password is entered correctly to avoid any connection issues.
6. Connect to Extended WiFi: Wait for the setup countdown to finish and then go back to your phone/PC WiFi settings. Connect to the extended WiFi network using your router's password. The extended WiFi network will have a name like "Your WiFi Name-2G" or "Your WiFi Name-5G". After setup, relocate the extender halfway between the router and the WiFi dead zone for better signal strength.

Note: The above steps are a summary of the instructions provided in the ihartan OEM-iHar-01 WiFi Extender User Guide. Please refer to the user guide for more detailed instructions and troubleshooting tips.