User Manual Q&AAnswer
Jan 15, 2025 - 02:47 AM
To install the Govee H6114 RGB Car LED Strip Lights, follow these steps:
1. Preparation Before Installing:
a. Unpack the box and check all items listed in the packing list.
b. Power on the strip lights and check whether they light up.
2. Installing Steps:
a. Wipe the installing surface to make sure it's clean and smooth.
b. Install the cigarette lighter and control box in the central console.
c. Peel off the protective film and stick the strip lights as indicated in the picture.
d. Firmly press the strip from end to end and reinforce ends of the strip with zip ties and screws.
e. Insert the cigarette lighter into the socket and press the button on it. The button will light on, indicating the strip light is powered on.
For more detailed instructions and illustrations, please refer to the Govee H6114 RGB Car LED Strip Lights User Manual.
Note: It is important to ensure that the surface is clean and smooth before installation to ensure proper adhesion. Additionally, reinforcing the ends of the strip with zip ties and screws will help secure the strip in place.
If you have any further questions or need assistance, you can contact Govee customer service at support@govee.com or visit their website at govee.com for more information.
Add New Comment