User Manual Q&AAnswer
Jan 15, 2025 - 02:29 AM
To connect the RDIC SGM-170 Digital to Analog Audio Converter to your devices, follow these steps:
1. For digital audio input, use either the optical or coaxial interface to connect your CD/DVD player, HD player, or other devices using an optical cable or coaxial cable.
Note: This converter does not support USB flash disks.
2. For USB audio input, connect your computer to the USB interface using a USB cable.
3. Use an RCA cable or a 3.5mm audio cable to connect the converter's analog audio output interface to your audio amplifier or headphones.
4. Connect the DC 5V power connector of the converter to a power supply using the provided USB power cable.
5. Adjust the volume using the volume adjustment xxxx on the converter.
6. If desired, adjust the bass component by turning the bass adjustment xxxx on the converter.
Please refer to the user manual for more detailed instructions and diagrams of the interfaces.
Add New Comment