User Manual Q&AAnswer
Jan 15, 2025 - 02:07 AM
To update the firmware for the FETtec Mini AIO 15A, you will need to use the FETtec Configurator. Here are the steps:
1. Download the FETtec Configurator from the official FETtec GitHub page (https://github.com/FETtec).
2. Connect the FETtec Mini AIO 15A to your computer via USB.
3. Open the FETtec Configurator and choose the USB connection option.
4. The FETtec F3 Nano-FC will be detected by the configurator.
5. Use the "Remote Firmware" option in the configurator and select the newest available firmware.
6. Click on "Flash selected" to start the firmware update process. This may take some time, so please be patient.
7. Once the firmware update is complete, the FC is successfully flashed.
8. You can now make further settings and adjustments using the KISS GUI. Download the KISS GUI from the official KISS GitHub page (https://github.com/flyduino/kiss-gui/...).
9. In the KISS GUI, choose "KISS FC Passthrough" and press connect. All devices should be shown now.
10. The Overview page in the KISS GUI allows you to flash individual ESCs, while the Setting page allows you to adjust all available ESC parameters.
11. Additionally, you can make OSD firmware updates by connecting to the FETtec Configurator and flashing the latest firmware via FC Passthrough.
Please refer to the FETtec Mini AIO 15A user manual for more detailed instructions and information on specific settings and configurations.
Add New Comment