User Manual Q&AAnswer
Jan 15, 2025 - 01:47 AM
To charge the TalentCell YB1206000 Portable Li-ion Power Bank, please follow these steps:
1. Connect the AC-DC charger to a power socket. The charger supports a voltage range of 100-240V.
2. Push the switch of the power bank to position "I" to activate the charging circuit.
3. Connect the power bank to the AC-DC charger using the provided cable.
4. The LED indicator on the AC-DC charger will turn red, indicating that the charging process has started.
5. The LED indicator will turn green when the charging process is complete or if the charging circuit is open.
6. The LED indicator will change from red to green when the power bank is charged up to 95% of its full capacity.
7. Once the power bank is fully charged, remove the AC wall charger from the power socket.
Please note that the full charge time will depend on the capacity of the power bank and the output current of the charger. You can calculate the estimated full charge time using the formula: Full charge time (estimated) = Capacity of power bank / Output current of charger.
For any further inquiries or troubleshooting assistance, you can contact TalentCell through their website or email provided in the user manual.
Add New Comment