User Manual Q&AAnswer
Jan 15, 2025 - 01:27 AM
To install the Commax DP-SS Intercom Audio Phone, follow these steps:
1. Attach the bracket to the wall using screws. Make sure it is securely fastened.
2. Once the bracket is attached, adjust the groove of the product with the bracket and then pull it down.
3. Connect the wiring according to the wiring diagram provided in the manual.
4. Ensure that the power source is supplied from the doorstation, so there is no need for an additional power connection.
5. Test the installation by pressing the call button on the doorstation. You should hear a call sound from the receiver.
6. Raise up the handset to converse with the visitor.
7. After confirming the identity of the visitor, press the door release button to open the door.
Please refer to the user manual for more detailed instructions and illustrations on the installation process.
Add New Comment