User Manual Q&AAnswer
Jan 15, 2025 - 01:09 AM
To connect the Arylic A50 Wi-Fi & Bluetooth Amplifier to your home network, follow these steps:
1. Hold the MODE button on the device and plug in the power cable.
2. The LED light will start flashing. Release the button and wait until the LED flashes slowly.
3. Make sure your mobile device is connected to your home network using 2.4G Wi-Fi, and ensure that your GPS and Bluetooth are turned on.
4. Open the 4STREAM app on your mobile device. For Android devices, the system may ask for permission to use GPS data and file storage. Please accept these permissions.
5. The 4STREAM app will list all available devices for setup. Choose the Arylic A50 from the list.
6. The app will then prompt you to choose the network you want the device to connect to. Select your desired network.
7. Enter the password for your network. If you want to connect to a different network, you can change it at this step.
8. Once the connection is established, the app will automatically check for new updates.
9. You can now change the name of the device to your preference.
10. After defining the device name, it will appear in the device list in the 4STREAM app, and you can start streaming music.
Note: If you change to another router or the password of the connected router has been changed, you can press the MODE button twice in Wi-Fi mode to reset the connection. Holding the MODE button and plugging in the power can force the device to enter Wi-Fi mode. If you have previously set up a router connection, the device will automatically connect to that router.
For more detailed instructions and troubleshooting, please refer to the Arylic A50 Wi-Fi & Bluetooth Amplifier User Manual.
Add New Comment