User Manual Q&AAnswer
Jan 15, 2025 - 12:42 AM
To adjust the LCD contrast on the , follow these steps:
1. Connect the USB Power cable or use the Battery Switch to turn on the Oscilloscope.
2. Once the power is connected, the LCD will turn on.
3. Locate the trimmer for LCD contrast at the rear side of the oscilloscope.
4. Use an isolated screwdriver to adjust the trimmer.
5. Turn the trimmer clockwise or counterclockwise to increase or decrease the LCD contrast, respectively.
6. Keep adjusting until you achieve the desired contrast level.
Please refer to the user manual for more detailed instructions and illustrations.
Add New Comment