User Manual Q&AAnswer
Jan 15, 2025 - 12:38 AM
To install the KEF Ci250RRb The Extreme Architectural Subwoofer in a dry-lined, stud partition wall, follow these steps:
1. Ensure that the installation is performed by a skilled installer who has knowledge of local building and fire codes and is familiar with the environment behind the wall.
2. Before starting the installation, make sure there are no electric cables, water or gas pipes, or supporting joists in the area where you plan to install the speaker. Cutting through any of these can be dangerous.
3. Verify that the wall or ceiling can support the weight of the speaker assembly. If necessary, reinforce the area to ensure proper support.
4. Determine the desired location for the speaker and mark the cut-out dimensions on the wall or ceiling. The cut-out dimensions for the Ci250RRb are Ø300mm (11.81in.) in diameter.
5. Carefully cut out the marked area using appropriate tools, ensuring a clean and precise cut.
6. Once the cut-out is complete, insert the Ci250RRb speaker into the opening. Make sure it fits securely and flush with the wall or ceiling surface.
7. Connect the speaker to the required amplifier, which in this case is the KASA500.
8. Ensure that all connections are properly made and secure.
9. If desired, you can use an optional rough-in frame or rear enclosure for additional support and acoustic performance. However, the manual does not mention any specific optional accessories for the Ci250RRb.
10. Finally, adjust the settings on the amplifier according to your preferences and enjoy the superb sound quality delivered by the KEF Ci250RRb The Extreme Architectural Subwoofer.
Please note that this answer is based on the information provided in the user manual. For more detailed and specific installation instructions, it is recommended to refer to the manual or consult a professional installer.
Add New Comment