How do I use the UFP EDGE 444723 Native Woods Shiplap Touch Up Paint Kit? (UFP EDGE Native Woods Shiplap Touch-Up Paint Kit Instruction Guide)

Answer

manuals.plus

Jan 15, 2025 - 12:03 AM

Sure! Here are the step-by-step instructions on how to use each component of the UFP EDGE 444723 Native Woods Shiplap Touch Up Paint Kit:

1. Dauber Bottle:
a. Shake the bottle well to ensure the paint is properly mixed.
b. To apply the paint with the dauber provided, stamp the dauber on a scrap piece until the paint starts flowing.
c. Stroke the dauber in the direction of the larger repair or edge that needs touch-up.
d. If you need to transfer the paint into one of the markers, use the plastic pipettes included in the kit.
e. After use, make sure to replace the cap on the bottle to prevent the paint from drying out.

2. Dauber Marker:
a. The dauber markers are used for minor restoration of finished boards and edges.
b. One marker is already filled with paint. To activate the marker, stamp the dauber on a scrap piece until the paint flows through the nib.
c. Stroke the dauber marker in the direction of the scratch or repair area that needs touch-up.

3. Marker:
a. The markers are also used for minor restoration of finished boards and edges.
b. Once one marker is filled with paint, compress the nib of the marker with the nib pointing up.
c. Test the marker on a scrap piece by compressing the nib until the paint flows through the nib.
d. Stroke the marker in the direction of the scratch or repair area that needs touch-up.

Remember to always follow the instructions provided in the manual and test the touch-up paint on a scrap piece before applying it to the actual surface. This will help ensure the desired result and prevent any mistakes or damage.