User Manual Q&AAnswer
Jan 14, 2025 - 11:57 PM
To mount the KLUS K-10-WL Fastener Suspending LED Lighting Fixtures, follow these steps:
1. Gather all the necessary components: K-10-WL Fastener, wire, wall fastener, power supply (12V/24V), and the lighting fixture.
2. Ensure that all LED tapes are connected to a 12V or 24V power supply. This is important for proper functioning.
3. Mount the fasteners (1) onto the wires (2) and the wall fasteners (3). The number of fasteners required depends on the length of the fixture:
- Use fasteners for 1 meter of fixture.
- Use fasteners for 2 meters of fixture.
- Use fasteners for 3 meters of fixture.
4. Connect the lighting fixture (5) to the 12V/24V power supply (4).
5. Snap the lighting fixture into the fasteners securely.
For more detailed mounting procedures and additional accessories, you can refer to the official website www.KlusDesign.eu. Please note that the drawings in the instructions are simplified and approximate the actual shapes of the extrusions and accessories.
If you have any further questions or need assistance, you can visit the website mentioned above or contact their customer support for more specific guidance.
Add New Comment