User Manual Q&AAnswer
Jan 14, 2025 - 11:56 PM
To charge the SEALEY LED180 Inspection Light, follow these steps:
1. Connect the charger into the charge socket on the light.
2. Plug the charger into a power supply and turn it on.
3. The red charge LED on the light will light up, indicating that the battery is charging.
4. When the battery is fully charged, the LED will turn green.
5. Disconnect the charger from the mains supply.
Note: The charging time for the battery is approximately 3 hours. The lithium battery does not suffer from memory effect and can be stored for up to six months without needing another charge.
Please refer to the manual for more detailed instructions and safety precautions regarding charging and battery usage.
Add New Comment